Industrial Hose & Hydraulics

Main Office • Pompano Beach • (954) 960-0311 • M - F 7:30am - 5:00pm
Industrial Hose & Hydraulics
Ft Lauderdale/Port Everglades
(954) 525-8165 • M - F 7:30am - 4:00pm
Cylinder & Machine Shop
(954) 975-3211 • M - F 7:00am - 3:00pm
Call for FREE Quote
1-800-442-0311

Boss Fittings

Boss Clamps

Replacement nuts and bolts are available, contact Dixon for more information. The bolts used in the Boss interlocking clamps are not standard bolts. They vary from standard bolts in their length, diameter, overall thread length and material hardness. These bolts can be retorqued, but it is not recommended that the bolts or clamps be reused, as they are designed for a single bend only. Dixon recommends using only factory supplied replacement bolts. Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely effect clamp performance. Do not lubricate nuts and bolts. See page 704 for Fraction to Decimal conversion chart. Recommended torque rating in ft. lbs.

Two clamp sections, 2-bolt type, 2 gripping fingers, 1/4 in - 1/2 in design

Two clamp sections, 2-bolt type, 2 gripping fingers, 1/4" - 1/2" design

Two clamp sections, 4-bolt type, 2 gripping fingers

Two clamp sections, 4-bolt type, 2 gripping fingers

Two clamp sections, 4-bolt type, 4 gripping fingers

Two clamp sections, 4-bolt type, 4 gripping fingers

Hose ID Hose OD Plated Iron Stainless Steel Brass Product Resources
from to Part # Opt Qty Part # Torque Part # Torque Dimensional Specs Brochure/Literature
1/4 36/64 42/64 BD 100 --- 6 --- --- --- Outside Air Applications
3/8 44/64 56/64 CD 100 --- 6 --- --- --- Outside Air Applications
1/2 52/64 60/64 DD 100 --- 6 --- --- --- Outside Air Applications
1/2 58/64 1-2/64 968 50 --- 6 --- --- 968 Outside Air Applications
1/2 60/64 1-4/64 B4 25 RB4 12 BB4 10 B4  RB4 Outside Air Applications
1/2 1-4/64 1-12/64 B5 25 --- 12 --- --- B5 Outside Air Applications
3/4 1-10/64 1-20/64 BU9 50 RBU9 21 BBU9 18 BU9  RBU9 Outside Air Applications
3/4 1-20/64 1-32/64 B9 25 RB9 21 --- 18 B9  RB9 Outside Air Applications
3/4 1-32/64 1-44/64 B10 25 --- 21 --- --- --- Outside Air Applications
1 1-26/64 1-36/64 156 20 --- 21 --- --- 156 Outside Air Applications
1 1-34/64 1-46/64 BU14 25 RBU14 21 BBU14 18 RBU14 Outside Air Applications
1 1-44/64 1-60/64 B14 25 RB14 21 BB14 18 B14 Outside Air Applications
1 1-60/64 2-8/64 B15 20 --- 21 --- --- --- Outside Air Applications
1-1/4 1-32/64 1-50/64 BU18 10 --- 40 --- --- --- Outside Air Applications
1-1/4 1-44/64 1-56/64 187 10 --- 21 --- --- 187 Outside Air Applications
1-1/4 1-50/64 2-6/64 BU19 10 --- 40 --- --- --- Outside Air Applications
1-1/4 1-56/64 2-4/64 206 20 --- 21 --- --- 206 Outside Air Applications
1-1/4 2-8/64 2-24/64 B19 10 RB19 40 --- 28 --- Outside Air Applications
1-1/2 1-52/64 2 BU22 10 --- 40 --- --- BU22 Outside Air Applications
1-1/2 2 2-14/64 B22 10 --- 40 --- --- --- Outside Air Applications
1-1/2 2 2-8/64 212 10 --- 21 --- --- 212 Outside Air Applications
1-1/2 2-4/64 2-16/64 225 10 --- 40 --- --- 225 Outside Air Applications
1-1/2 2-12/64 2-24/64 BU24 10 RBU24 40 --- 28 RBU24 Outside Air Applications
1-1/2 2-24/64 2-36/64 B24 10 RB24 40 --- --- --- Outside Air Applications
1-1/2 2-36/64 2-48/64 B25 10 --- 40 --- --- --- Outside Air Applications
2 2-16/64 2-32/64 250 10 --- 40 --- --- 250 Outside Air Applications
2 2-22/64 2-34/64 BU28 10 --- 60 --- --- --- Outside Air Applications
2 2-32/64 2-48/64 275 10 --- 40 --- --- 275 Outside Air Applications
2 2-32/64 2-50/64 BU29 10 RBU29 60 BBU29 40 BU29  RBU29  BBU29 Outside Air Applications
2 2-48/64 3-4/64 B29 10 RB29 60 --- --- --- Outside Air Applications
2 2-48/64 3-4/64 306 10 --- 60 --- --- 306 Outside Air Applications
2 3-6/64 3-28/64 B30 5 --- 60 --- --- --- Outside Air Applications
2-1/2 3-4/64 3-32/64 350 5 --- 60 --- --- 350 Outside Air Applications
2-1/2 3-6/64 3-28/64 BU34 5 --- 60 --- --- --- Outside Air Applications
2-1/2 3-32/64 3-60/64 B34 5 --- 150 --- --- --- Outside Air Applications
3 3-32/64 3-48/64 375 5 --- 60 --- --- --- Outside Air Applications
3 3-32/64 3-60/64 BU35 5 RBU35 150 --- --- BU35  RBU35 Outside Air Applications
3 3-48/64 4 401 5 --- 150 --- --- 401 Outside Air Applications
3 3-52/64 4-4/64 B35 5 --- 150 --- --- --- Outside Air Applications
3 4 4-12/64 418 4 --- 200 --- --- 418 Outside Air Applications
3 4-4/64 4-28/64 B39 5 --- 200 --- --- --- Outside Air Applications
3 4-12/64 4-32/64 450 2 --- 200 --- --- 450 Outside Air Applications
Three clamp sections, 6-bolt type, 3 gripping fingers

Three clamp sections, 6-bolt type, 3 gripping fingers

Part # Hose ID Hose OD Product Resources
From To Dimensional Specs
BU494"5-16/64"5-38/64"BU49
BS494"4-56/64"5-16/64"BS49
BS393"4-16/64"4-52/64"---
B494"5-34/64"5-60/64"---
B454"4-40/64"5"B45
8506"7-32/64"8"---
7506"6-56/64"7-24/64"---

Boss Holedall Fittings

Boss Holedall fittings are designed for air and liquid applications where a permanent, low profile clamping system is desired. Both fittings are supplied with carbon steel ferrules. Consult Dixon for swage and/or crimp specifications.

Boss Holedall Fittings
Part # Material Size Hose OD Product Resources
From To Dimensional Specs Brochure/Literature
RGF81P2Stainless Steel2"2-41/64"2-48/64"---Outside Air Applications
RGF81P1Stainless Steel2"2-36/64"2-40/64"---Outside Air Applications
RGF61P2Stainless Steel1-1/2"2-1/64"2-8/64"---Outside Air Applications
RGF61P1Stainless Steel1-1/2"1-20/64"2"---Outside Air Applications
GF81P3Plated Iron/Steel2"2-49/64"2-56/64"GF81P3Outside Air Applications
GF81P2Plated Iron/Steel2"2-41/64"2-48/64"GF81P2Outside Air Applications
GF81P1Plated Iron/Steel2"2-36/64"2-40/64"GF81P1Outside Air Applications
GF61P3Plated Iron/Steel1-1/2"2-9/64"2-16/64"GF61P3Outside Air Applications
GF61P2Plated Iron/Steel1-1/2"2-1/64"2-8/64"GF61P2Outside Air Applications
GF61P1Plated Iron/Steel1-1/2"1-20/64"2"GF61P1Outside Air Applications
GF36P3Plated Iron/Steel1"1-39/64"1-42/64"---Outside Air Applications
GF36P2Plated Iron/Steel1"1-35/64"1-38/64"---Outside Air Applications
GF36P1Plated Iron/Steel1"1-30/64"1-34/64"---Outside Air Applications
GF26P3Plated Iron/Steel3/4"1-19/64"1-22/64"---Outside Air Applications
GF26P2Plated Iron/Steel3/4"1-15/64"1-18/64"---Outside Air Applications
GF26P1Plated Iron/Steel3/4"1-10/64"1-14/64"---Outside Air Applications
GF111P3Plated Iron/Steel3"3-49/64"3-56/64"GF111P3Outside Air Applications
GF111P2Plated Iron/Steel3"3-41/64"3-48/64"GF111P2Outside Air Applications
GF111P1Plated Iron/Steel3"3-26/64"3-40/64"GF111P1Outside Air Applications

Boss Adapters

Features: Plated steel and / or iron. These fittings have male or female NPT threads and are designed to fit the standard ground joint spuds on page 94. Supplied with a wing nut, as shown. For safety tags and safety tape, see page 672.

Male NPT Adapters

Male NPT Adapters

Part # Male Thread Size Product Resources
Dimensional Specs Brochure/Literature
GMAS63/4"GMAS6Outside Air Applications
GMAS262"GMAS26Outside Air Applications
GMAS211-1/2"GMAS21Outside Air Applications
GMAS161-1/4"------
GMAS111"GMAS11Outside Air Applications
Female NPT Adapters

Female NPT Adapters

Part # Female Thread Size Product Resources
Dimensional Specs Brochure/Literature
GFAS63/4"---Outside Air Applications
GFAS262"GFAS26---
GFAS211-1/2"------
GFAS161-1/4"------
GFAS111"GFAS11Outside Air Applications

Boss Wing Nut Caps

Features: Plated steel and / or iron. Supplied with 12" chain and washer. For best results, use with washer style spuds and washers on pages 96 and 97.

Boss Wing Nut Caps
Part # Size Product Resources
Dimensional Specs Brochure/Literature
B37SC3"B37SCOutside Air Applications
B27SC2"B27SCOutside Air Applications
B17SC1-1/4" and 1-1/2"---Outside Air Applications
B12SC3/4" and 1"B12SCOutside Air Applications

Ground Joint Air Hammer Couplings

Features: Ground Joint Type - rounded steel head of stem fits concave inserts in spuds for superior sealing. Metal-to-metal copper seat seal. Plated steel and / or iron. For use with Boss clamps.

Complete Female

Complete Female

Part # Female Thread Size Style Product Resources
Dimensional Specs Brochure/Literature
GDF83/4"Compact---Outside Air Applications
GDF61/2"Compact---Outside Air Applications
GDF121"Heavy Duty---Outside Air Applications
GDF103/4"Heavy Duty---Outside Air Applications
Stem

Stem

Part # Hose ID Style Product Resources
Dimensional Specs Brochure/Literature
GBB183/4"Heavy Duty---Outside Air Applications
GBB111"Heavy Duty---Outside Air Applications
GBA463/4"Compact---Outside Air Applications
GBA451/2"Compact---Outside Air Applications
Wing Nut

Wing Nut

Part # Thread Size Style Product Resources
Dimensional Specs Brochure/Literature
J471-31/64" OD x 8 TPICompactJ47Outside Air Applications
DLB121-47/64" OD x 8 TPIHeavy Duty---Outside Air Applications
Female Spud

Female Spud

Part # Thread Size Female Thread Size Style Product Resources
Dimensional Specs Brochure/Literature
GJ651-31/64" OD x 8 TPI1/2"CompactGJ65Outside Air Applications
GJ551-31/64" OD x 8 TPI3/4"Compact---Outside Air Applications
GDL81-47/64" OD x 8 TPI3/4"Heavy Duty---Outside Air Applications
GDL131-47/64" OD x 8 TPI1"Heavy Duty---Outside Air Applications
Male Spud

Male Spud

Part # Thread Size Male Thread Size Style Product Resources
Dimensional Specs Brochure/Literature
GJ601-31/64" OD x 8 TPI1/2"Compact---Outside Air Applications
GJ501-31/64" OD x 8 TPI3/4"CompactGJ50Outside Air Applications
GDL71-47/64" OD x 8 TPI3/4"Heavy DutyGDL7Outside Air Applications
GDL101-47/64" OD x 8 TPI1"Heavy Duty---Outside Air Applications
Double Spud

Double Spud

Part # Thread Size Style Product Resources
Dimensional Specs Brochure/Literature
GJ751-31/64" OD x 8 TPICompactGJ75Outside Air Applications
GDL251-47/64" OD x 8 TPIHeavy Duty---Outside Air Applications

316 Stainless Steel Ground Joint

Recommended for steam service up to 450°F. Not to be used with #250, #275 or #306 Boss clamps.

Complete Female

Complete Female

Part # Material Size Seal Product Resources
Dimensional Specs Brochure/Literature
RGF81316 Stainless Steel2"Positive Metal-to-Polymer Seal------
RGF61316 Stainless Steel1-1/2"Positive Metal-to-Polymer Seal------
RGF51316 Stainless Steel1-1/4"Positive Metal-to-Polymer Seal------
RGF36316 Stainless Steel1"Positive Metal-to-Polymer Seal------
RGF26316 Stainless Steel3/4"Positive Metal-to-Polymer SealRGF26---
Stem

Stem

Part # Material Size Product Resources
Dimensional Specs Brochure/Literature
RGB6316 Stainless Steel3/4"RGB6---
RGB26316 Stainless Steel2"RGB26---
RGB21316 Stainless Steel1-1/2"RGB21---
RGB16316 Stainless Steel1-1/4"RGB16---
RGB11316 Stainless Steel1"RGB11---
Wing Nut

Wing Nut

Part # Material Size Product Resources
Dimensional Specs Brochure/Literature
RB27316 Stainless Steel2"------
RB17316 Stainless Steel1-1/4" and 1-1/2"------
RB12316 Stainless Steel3/4" and 1"RB12---
Female Spud

Female Spud

Part # Material Thread Size Seat Product Resources
Dimensional Specs Brochure/Literature
RGB8316 Stainless Steel3/4"PolymerRGB8---
RGB28316 Stainless Steel2"PolymerRGB28---
RGB23316 Stainless Steel1-1/2"PolymerRGB23---
RGB18316 Stainless Steel1-1/4"PolymerRGB18---
RGB13316 Stainless Steel1"PolymerRGB13---

Brass Ground Joint

Not to be used with #250, #275 or #306 Boss clamps.

Complete Female

Complete Female

Part # Size Product Resources
Dimensional Specs Brochure/Literature
BGF812"------
BGF611-1/2"------
BGF511-1/4"------
BGF361"------
BGF263/4"------
Stem

Stem

Part # Size Product Resources
Dimensional Specs Brochure/Literature
BGB63/4"------
BGB262"------
BGB211-1/2"------
BGB161-1/4"------
BGB111"------
Wing Nut

Wing Nut

Part # Size Product Resources
Dimensional Specs Brochure/Literature
BB272"------
BB171-1/4" and 1-1/2"------
BB123/4" and 1"------
Female Spud

Female Spud

Part # Thread Size Product Resources
Dimensional Specs Brochure/Literature
BGB83/4"------
BGB282"BGB28---
BGB231-1/2"------
BGB181-1/4"------
BGB131"------

316 Stainless Steel Washer Style

Not to be used with #250, #275 or #306 Boss clamps. Washer is nitrile rubber bonded, non-asbestos Klingersil® C-4401. Brass Washer Style available.

Complete Female

Complete Female

Part # Material Size Product Resources
Dimensional Specs Brochure/Literature
RWF81316 Stainless Steel2"------
RWF61316 Stainless Steel1-1/2"------
RWF51316 Stainless Steel1-1/4"------
RWF36316 Stainless Steel1"------
RWF26316 Stainless Steel3/4"RWF26---
Stem

Stem

Part # Material Size Product Resources
Dimensional Specs Brochure/Literature
RB6316 Stainless Steel3/4"------
RB26316 Stainless Steel2"------
RB21316 Stainless Steel1-1/2"------
RB16316 Stainless Steel1-1/4"------
RB11316 Stainless Steel1"------
Wing Nut

Wing Nut

Part # Material Size Product Resources
Dimensional Specs Brochure/Literature
RB27316 Stainless Steel2"------
RB17316 Stainless Steel1-1/4" and 1-1/2"------
RB12316 Stainless Steel3/4" and 1"RB12---
Female Spud

Female Spud

Part # Material Thread Size Product Resources
Dimensional Specs Brochure/Literature
RB8316 Stainless Steel3/4"------
RB28316 Stainless Steel2"------
RB23316 Stainless Steel1-1/2"RB23---
RB18316 Stainless Steel1-1/4"------
RB13316 Stainless Steel1"RB13---
Washer

Washer

Part # Size Product Resources
Dimensional Specs Brochure/Literature
W171-1/4" and 1-1/2"W17Outside Air Applications / Klinger Gasket MSDS
W123/4" and 1"W12Outside Air Applications / Klinger Gasket MSDS

Boss Coupling System

Features: The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment. The stem part that is clamped to the hose is the other half. The two halves are connected or disconnected by rotating the wing nut onto the spud. When connected they achieve a mechanical, as well as, a pressure seal.

Boss Coupling System

Boss Washer Seal

Features: A Klingersil® C-4401 washer is inserted between the stem and spud. A leakproof seal is formed by rotating the wing nut and hammering it tight. Recommended for steam service up to 450°F. Easy to seal. Works with existing fittings. Plated steel and / or iron. Use with Boss clamps found on pages 99 and 100.

Complete Female

Complete Female

Stem

Stem

Wing Nut

Wing Nut

Knurled Nut

Knurled Nut

Hose Shank x NPT Complete Female Stem Wing Nut Knurled Nut Product Resources
Part # Part # Opt Qty Part # Opt Qty Part # Opt Qty Dimensional Specs Brochure/Literature
3/8WF3SS337100CB100------WF3 SS337Outside Air Applications
1/2WF6B1100B2100------B1 B2Outside Air Applications
1/2x3/4WF26-1B6-150B1225------B6-1 B12Outside Air Applications
3/4WF26B650B1225KB1225B6 B12 KB12Outside Air Applications
1WF36B1150B1225KB1225WF36 B11 B12 KB12Outside Air Applications
1-1/4WF51B1625B1725------B17Outside Air Applications
1-1/2WF61B2125B1725------B21 B17Outside Air Applications
2WF81B2610B2710------WF81 B26 B27Outside Air Applications
2-1/2WF96B315B325---------Outside Air Applications
3WF111B365B375------WF111 B36Outside Air Applications
Female Spud

Female Spud

Male Spud

Male Spud

Double Spud

Double Spud

Washer

Washer

Thread Female Spud Male Spud Double Spud Washer Product Resources
Part # Opt Qty Part # Part # Part # Dimensional Specs Brochure/Literature
3/8 CC 100 WMC --- WBCWBCOutside Air Applications
1/2 B3 100 WM3 DB3 W2B3 WM3Outside Air Applications
3/4 B8 25 WM8 DB13 W12B8 W12Outside Air Applications / Klinger Gasket MSDS
1 B13 50 WM13 DB13 W12B13 WM13 W12Outside Air Applications / Klinger Gasket MSDS
1-1/4 B18 25 WM18 DB23 W17W17Outside Air Applications / Klinger Gasket MSDS
1-1/2 B23 25 WM23 DB23 W17WM23W17Outside Air Applications / Klinger Gasket MSDS
2 B28 10 WM28 DB28 W27WM28Outside Air Applications / Klinger Gasket MSDS
2-1/2 B33 5 --- --- W32---Outside Air Applications / Klinger Gasket MSDS
3 B38 5 WM38 DB38 W37B38 WM38Outside Air Applications / Klinger Gasket MSDS

GJ Boss™ Ground Joint Seal

Positive Metal-to-Polymer Seal

Features: A leakproof seal is formed when the metal head of the stem makes contact with the patented polymer seat in the spud. The non-metallic polymer seat resists most chemicals found in manufacturing facilities. (reference corrosion resistance chart on pages 694-699). Recommended for steam service up to 450°F. Easy to seal. Works with existing fittings. Plated steel and / or iron. Use with Boss clamps found on pages 99 and 100.

Complete Female

Complete Female

Stem

Stem

Wing Nut

Wing Nut

Knurled Nut

Knurled Nut

Hose Shank x NPT Complete Female Stem Wing Nut Knurled Nut Product Resources
Part # Part # Opt Qty Part # Opt Qty Part # Opt Qty Dimensional Specs Brochure/Literature
1/4 GF1 GBA 100 SLS4 100 --- ---GF1Outside Air Applications
3/8 GF3 GCA 100 CB 100 --- ---GF3Outside Air Applications
1/2 GF6 GB1 100 B2 100 --- ---GF6 B2Outside Air Applications
1/2 x 3/4 GF26-1 GB6-1 50 B12 25 --- ---GB6-1 B12Outside Air Applications
3/4 GF26 GB6 50 B12 25 KB12 25GF26 B12 KB12Outside Air Applications
1 GF36 GB11 50 B12 25 KB12 25GF36 B12 KB12Outside Air Applications
1-1/4 GF51 GB16 25 B17 25 --- ---GF51 B17Outside Air Applications
1-1/2 GF61 GB21 25 B17 25 --- ---GF61 GB21 B17Outside Air Applications
2 GF81 GB26 10 B27 10 --- ---GF81 GB26 B27Outside Air Applications
2-1/2 GF96 GB31 5 B32 5 --- ---GF96Outside Air Applications
3 GF111 GB36 5 B37 5 --- ---GF111Outside Air Applications
4 GF141 GB46 5 B47 5 --- ---GF141 GB46 B47Outside Air Applications
6 GF201 GB66 2 B67 2 --- ---GF201 B67Outside Air Applications
Female Spud

Female Spud

Male Spud

Male Spud

Double Spud

Double Spud

Thread Female Spud Male Spud Double Spud Product Resources
Part # Opt Qty Part # Part # Dimensional Specs Brochure/Literature
1/4 GBC 100 --- ------Outside Air Applications
3/8 GCC 100 GMC ------Outside Air Applications
1/2 GB3 100 GM3 GDB3GM3Outside Air Applications
3/4 GB8 50 GM8 GDB13GB8 GM8 GDB13Outside Air Applications
1 GB13 50 GM13 GDB13GB13 GM13 GDB13Outside Air Applications
1-1/4 GB18 25 GM18 GDB23GM18Outside Air Applications
1-1/2 GB23 25 GM23 GDB23GB23 GM23Outside Air Applications
2 GB28 10 GM28 GDB28GB28 GM28Outside Air Applications
2-1/2 GB33 5 GM33 GDB33GM33Outside Air Applications
3 GB38 5 GM38 GDB38GB38 GM38Outside Air Applications
4 GB48 5 --- ---GB48Outside Air Applications
6 GB68 2 --- ------Outside Air Applications

Boss Male Stems

Use with Boss clamps on pages 99 and 100. For safety tags and safety tape see page 672.

Plated Steel Barstock

Plated Steel Barstock

Plated Iron

Plated Iron

316 Stainless

316 Stainless

Brass

Brass

Hose x NPT Size Plated Steel Bar Stock Plated Iron 316 Stainless Brass Product Resources
Part # Opt Qty Size Part # Opt Qty Size Part # Size Part # Dimensional Specs Brochure/Literature
1/4" x 1/8" MS4X2 25 --- --- --- 1/2 RMS1 --- ---RMS1Outside Air Applications
1/4" x 1/4" MSA 50 --- --- --- 3/4 RMS6 3/4 BMS6RMS6 BMS6Outside Air Applications
1/4" x 3/8" MSB 25 --- --- --- 1 RMS11 1 BMS11RMS11Outside Air Applications
3/8" x 1/4" MS6X4 25 1-1/4 MS16 20 1-1/4 RMS16 1-1/4 BMS16RMS16Outside Air Applications
3/8" x 3/8" MSC 100 1-1/2 MS21 20 1-1/2 RMS21 1-1/2 BMS21MS21 RMS21 BMS21Outside Air Applications
3/8" x 1/2" MS6X8 25 2 MS26 10 2 RMS26 2 BMS26MS26 RMS26 BMS26Outside Air Applications
1/2" x 1/4" MS8X4 25 2-1/2 MS31 5 2-1/2 RMS31 --- ---RMS31Outside Air Applications
1/2" x 3/8" MS8X6 50 3 MS36 5 3 --- 3 BMS36---Outside Air Applications
1/2" x 1/2" MS1 25 4 MS46 2 4 --- --- ------Outside Air Applications
1/2" x 3/4" MS8X12 25 --- --- --- --- --- --- ------Outside Air Applications
3/4" x 1/2" MS12X8 25 --- --- --- --- --- --- ------Outside Air Applications
3/4" x 3/4" MS6 25 --- --- --- --- --- --- ------Outside Air Applications
3/4" x 1" MS12X16 25 --- --- --- --- --- --- ------Outside Air Applications
1" x 3/4" MS16X12 25 --- --- --- --- --- --- ------Outside Air Applications
1" x 1" MS11 25 --- --- --- --- --- --- ---MS11Outside Air Applications

LP-Boss Male Stems

Schedule 80 stems meet NFPA 58.

Male NPT End

Male NPT End

Beveled End

Beveled End

Size Plated Steel 316 Stainless Schedule 80 Plated Steel Unplated Steel Product Resources
Part # Part # Part # Part # Dimensional Specs Brochure/Literature
1-1/4 LP16 --- LP16-80 ---------
1-1/2 LP21 --- LP21-80 ---LP21---
2 LP26 --- LP26-80 LPB26LPB26---
2-1/2 LP31 --- --- ---LP31---
3 LP36 RLP36 --- LPB36LP36 RLP36 LPB36Outside Air Applications
4 LP46 RLP46 --- ---LP46 RLP46Outside Air Applications
6 LP66 --- --- ---LP66---

Boss Hose Menders

Features: Collars engage gripping fingers of Boss clamps.

Boss Hose Menders
Material Size Part # Product Resources
Dimensional Specs Brochure/Literature
Plated Steel 1/2 M1M1Outside Air Applications
Plated Iron 3/4 M6M6Outside Air Applications
Plated Iron 1 M11---Outside Air Applications
Plated Iron 1-1/4 M16M16Outside Air Applications
Plated Iron 1-1/2 M21M21Outside Air Applications
Plated Iron 2 M26M26Outside Air Applications
Plated Iron 2-1/2 M31---Outside Air Applications
Plated Iron 3 M36M36Outside Air Applications

Boss Spud x Hose Shank

Features: Polymer seat.

Boss Spud x Hose Shank
Material Size Part # Product Resources
Dimensional Specs Brochure/Literature
Steel 1 GH1311------
Steel 2 GH2826------