Parker Vapor Recovery Hose (Series 1000)

Parker composite petrochemical hose is economical, flexible, light weight, durable and resistant to abrasion, kinking and vibration. Parker composite hose assembly systems - using a new generation of hose constructions, innovative dry seal coupling technology and parker crimping equipment - save time and expense due to quick fabrication, easy installation and superior long-lasting performance. Assemblies manufactured per customer requirement; hydrostatically tested to 150% of the rated working pressure.

Part Number	Hose I.D.		Approx Weight	Min Bend Rad	Max Rec WP	Max Lg
#	inch	mm	lbs/ft	in	psi	ft
1000GG-4000	4	101.6	3.0	11.0	100	70
1000GG-6000	6	152.4	4.0	16.0	100	65
1000GG-8000	8	203.2	8.0	22.0	100	65
1000GG-10000	10	254.0	18.0	35.0	100	50

Performance Characteristics
Inner Wire	Galvanized steel (G)
Inner Liner	Polypropylene fabric
Hose Wall	Multiple layers of fabric/film/tubes
Cover	Yellow PVC-covered polyester
Outer Wire	Galvanized steel (G)
Temp. Range	-40°F to +212°F (-40°C to +100°C)
Design Factor	4:1
Industry Standards	USCG 33CFR 154.810
Applications	Petroleum and petrochemical vapor recovery in bottom loading, ship-to-shore and tank truck transfer. NOTE: Not for dry material service.
Vacuum	Full
Compare to	Apollo 110P, Dantec Danoil VR; Peraflex GGP-VRH; Tift 944 Chemflex VRH; Uni-Chem Uni-VR; Wilcox 1321
Standard Wire	G (Galvanized) inner and outer
Alternate P/N Example	1000GS-4000 (Galvanized inner, Stainless outer)
Coupling Rec	Permanently attached one-piece male pipe or flanged ends; cam and groove. Refer to page 387 for standard factory coupling options.
Assemblies	Per customer requirement; hydrostatically tested to 150% of the rated working pressure.